WALL MOUNTED SPLIT – EVX
Awarded design at the Elysée Palace “Made In France” Exhibition 🟦⬜🟥
The evaporators for the EVX Split Systems are set against the cellar wall. Installation is simplified by the integration of the evaporator regulation plate. Their design means they can be discreetly integrated into the bottle racks.
Using the wireless remote control, this air conditioner perfectly controls the temperature and the humidity of your wine cellar.
Maximum volume of the cellar in m3*
(*according to model)
Starting at 7 739€ incl. VAT
Wireless remote control
Faultless regulation… and a wireless system developed exclusively by Friax, avoiding any cabling constraints
Customizable
The interchangeable colored front panel allows an infinite number of possibilities
Vintage
This is the most complete solution. It air conditions, heats and humidifies your cellar
Condensation unit
This encased air or water-based condensation unit manages the system’s cooling production
.Customizable
The modern and clean design of this cellar air conditioner can be personalized so that each wine cellar becomes unique.
The interchangeable colored front allows endless possibilities.
The Split EVX comes standard with a glossy black front.
Available colors
● Or Miroir
● Bois Cèdre
● Rouge Lipstick
● Bleu Intense
● Vigne Bourgogne
● Smooth Green
● Orange Pop
Can’t find what you are looking for? Ask us 😉
.Wall Mounted Solution
EVX evaporators fit perfectly into the cellar decor and in the middle of the bottles by simply attaching to the wall.
Friax split systems are based on the most modern and energy-efficient technologies. Above all designed for the comfort of wine, they do not ignore the user.
Wireless remote control
Included with every Vintage products
According to the type of installation chosen, it is not always easy to reach the regulator on a cellar air conditioner. Using Friax’s RSF remote control you can install the system further away without constraints. The signal passes through walls. The remote control does not necessarily have to be installed in the cellar room. In this way you can check your temperature and hygrometry without having to go down to the cellar.
WineSupervisor 3
sold separately
WineSupervisor is the connected wine cellar solution that allows the user to follow the operation of his cellar in real time and to be alerted in the event of an anomaly. The recording of temperature curves makes it possible to keep the traceability of the cellar.
Find out more 😉 : winesupervisor.fr
Evaporator | Vintage
The Vintage version integrates, in addition to the cold, the HGR% humidification system and heating to limit the temperature differences between the seasons and best protect the wine. The humidification system makes it possible to raise the humidity without adding heat and does not require demineralised water with a softener. The use of a KLPWSECU kit will facilitate and secure its connection to the water network.
The evaporator in detail
- Wall assembly in the cellar
- Black epoxy body
- Bronze-coloured aluminium facades
- Exterior Flare cooling connection
- Stainless steel expansion valve
- CWR (Cold water recycling) hygrometry stabilisation
- Operation and alarm indicators on the facade
- Breaker
- Built-in split electrical box
- EC adjustable speed ventilation
- RSF wireless remote control
- Display showing temperature and the system’s different functions
- Nitrogen-pressurized on delivery
- KCH built-in heating
- KHGR% built-in humidifier
Vintage accessories
- KPR Lift pump kit
- BNS Low sound emission kit for condensation unit
- KLPWSECU Secure Pressure Relief kit for humidifier
Condensation units
House, apartment, commercial premises, garage, ... A solution for each installation of wine cellar air conditioner.
Friax designs and produces its air conditioners in France in order to incorporate the best technologies. Specially developed for the wine cellar, control of regulation and sustainability are the central elements of our R&D.
To find out the size / power of appliance required for your cellar, go to the selection tool.
Air cooling units
GCH - Outside Air | Size 30 to 122
Units of size 30 to 122 are equipped with Condensation Unit GCH. Aesthetic, modern and practical groups, for an easy and discreet installation.
----
The GCH units consist of a frame in galvanized sheet metal and a bodywork coated with two-tone paint intended for outdoor installation.
The use of a micro-channel coil and an electronically commutated (EC) axial fan driven by the split regulation makes it possible to optimize the operation of the refrigeration system in summer and winter.
They are equipped with a tank, a liquid line with dehydrator and sight glass. Flare valves are provided for the refrigeration connection.
The safety of the group is ensured by high and low pressure cartridge pressure switches. The KPC condensation temperature control allows the correct operation of the refrigeration system in summer and winter.
The compressor receives a regulated RC crankcase heater to ensure its protection when the Friax split works in heating mode. The electrical connection is made on a waterproof electrical box. Condensing units are pre-charged with refrigerant.
Access to the electrical part is facilitated thanks to the gate located on the side of the device.
The hinged cover simplifies commissioning and maintenance operations.
The acoustic insulation of the group can be reinforced with a BNS kit.
GC - Ducted Air | Size 170 to 230
Splits ranging from size 30 to 230 with air-cooled condensation can be equipped with GCG units for ducted use.
They are equipped with a tank, a liquid line with a dehydrator and sight glass. Flare valves are provided for refrigeration connections.
They feature variable-speed EC centrifugal ventilation (maximum static pressure of 100 Pa), duct connection Ø 200 mm, a liquid tank, a liquid line with a dehydrator and sight glass.
Flare valves are included for refrigeration connections.
The unit's safety is ensured by high- and low-pressure cartridge-type pressure switches. The KPC condensation pressure regulation ensures the proper operation of the refrigeration system in both summer and winter.
The compressor is equipped with a regulated RC crankcase heater to protect it when the Friax split operates in heating mode. The electrical connection is made through a sealed electrical cabinet. Condensing units are pre-charged with refrigerant for a standard 6-meter connection.
A KBPL-GCG plenum is available as an accessory when the unit needs to be connected to a fresh air intake duct.
The unit’s acoustic insulation can be enhanced with a BNS kit.
Water cooling units
W - Eau | Size 30 to 230
Splits ranging from size 30 to 230 with water-cooled condensation are equipped with GCW units.
GCW units consist of a galvanized steel frame and a body coated with a two-tone paint finish.
They need to be installed under shelter in a frost-free environment.
They are not thermally insulated and therefore cannot be installed in the cellar.
They are equipped with a liquid line featuring a dehydrator and sight glass. Flare valves are provided for refrigeration connections.
The unit's safety is ensured by high- and low-pressure cartridge-type pressure switches (HBP). Condensation pressure regulation is managed by a pressostatic water valve (VEP), which must be adjusted during the unit's commissioning. This ensures the system operates properly year-round and optimizes water consumption for devices connected to a municipal water supply.
GCW units can also be connected to chilled water networks when such systems are available on-site.
| SPLIT |
SPC… |
30 |
48 |
| Cooling capacity |
W |
780 |
1100 |
| Heating capacity |
W |
800 |
800 |
| Electrical characteristics |
SPC… |
30 |
48 |
| Voltage |
50Hz |
230 V/1+T |
230 V/1+T |
| Electrical current requirement |
A max |
4.1 |
4.1 |
| Condensation unit |
SPC… |
30 |
48 |
| Air flow |
m3/h |
321 |
520 |
| Sound pressure level 5 m away without BNS (noise reduction system) |
db |
32 |
40 |
| Sound pressure level 5 m away with BNS | db | 29 | 37 |
| Sound pressure level 5 m away W unit | db | 37 | 40 |
| Gas connection suction (Flare) | Φ |
3/8′ |
3/8′ |
| Gas connection liquid line (Flare) | Φ | 1/4′ | 1/4′ |
| Water connection (on W) | Φ | 2 x 1/2’M | 2 x 1/2’M |
| Net weight |
Kg |
36 |
38 |
| Body colour |
RAL7016 + anodic Grey Natura |
RAL7016 + anodic Grey Natura |
|
| Refrigerant |
R513A |
R513A |
|
| Evaporator | SPC… | 30 | 48 |
| Ventilator | Nb | 1 | 1 |
| Air flow | m3/h | 225 | 335 |
| Gas connection suction (Flare) | Φ | 3/8′ | 3/8′ |
| Gas connection liquid line (Flare) | Φ | 1/4′ | 1/4′ |
| Net weight | Kg | 17 | 18 |
| Body colour | Black/White | Black/White |
All the technical documentation is available in your Pro Access
CHOOSE FRIAX
We can recommend a reseller who can advise you on your specific requirements
