NEW| EVX redesigned

WALL MOUNTED SPLIT – EVX

Awarded design at the Elysée Palace “Made In France” Exhibition 🟦⬜🟥

The evaporators for the EVX Split Systems are set against the cellar wall. Installation is simplified by the integration of the evaporator regulation plate. Their design means they can be discreetly integrated into the bottle racks.

Using the wireless remote control, this air conditioner perfectly controls the temperature and the humidity of your wine cellar.

Maximum volume of the cellar in m3*

(*according to model)

Wireless remote control

Faultless regulation… and a wireless system developed exclusively by Friax, avoiding any cabling constraints

Customizable

The interchangeable colored front panel allows an infinite number of possibilities

Vintage

This is the most complete solution. It air conditions, heats and humidifies your cellar

Condensation unit

This encased air or water-based condensation unit manages the system’s cooling production

.Customizable

The modern and clean design of this cellar air conditioner can be personalized so that each wine cellar becomes unique.

The interchangeable colored front allows endless possibilities.

The Split EVX comes standard with a glossy black front.

Available colors

● Or Miroir
● Bois Cèdre
● Rouge Lipstick
● Bleu Intense
● Vigne Bourgogne
● Smooth Green
● Orange Pop

Can’t find what you are looking for? Ask us 😉

.Wall Mounted Solution

EVX evaporators fit perfectly into the cellar decor and in the middle of the bottles by simply attaching to the wall.

Friax split systems are based on the most modern and energy-efficient technologies. Above all designed for the comfort of wine, they do not ignore the user.

Wireless remote control

Included with every products

According to the type of installation chosen, it is not always easy to reach the regulator on a cellar air conditioner. Using  Friax’s RSF remote control you can install the system further away without constraints. The signal passes through walls. The remote control does not necessarily have to be installed in the cellar room. In this way you can check your temperature and hygrometry without having to go down to the cellar.

sold separately


WineSupervisor is the solution of connected wine cellar that allows the user to follow in real time the operation of his cellar and to be alerted in case of anomaly. The recording of the temperature curves makes it possible to keep the traceability of the cellar. The use of temperature profiles transforms the place of implantation into a real natural cellar with perfectly controlled parameters …

Wine Storage

Whether ready to drink, or for long aging, wine requires the utmost care

The EVX range precisely adapts the atmosphere of the cellar to the conditions required for keeping and consuming the wines.

Controlling the alchemy of wine to achieve fulfillment is the secret of the Friax air conditioner …

The Friax Vision

Chill ‘loops are designed above all for the comfort of wine, but do not overlook the user. Once installed in the cellar, you will forget it …

Your cellar should not have a significant impact on climate change. Friax integrates the most modern and energy saving technologies.

Evaporator | Vintage

 

The Vintage version integrates, in addition to the cold, the HGR% humidification system and heating to limit the temperature differences between the seasons and best protect the wine. The humidification system makes it possible to raise the humidity without adding heat and does not require demineralised water with a softener. The use of a KLPWSECU kit will facilitate and secure its connection to the water network.

The evaporator in detail
  • Wall assembly in the cellar
  • Black epoxy body
  • Bronze-coloured aluminium facades
  • Exterior Flare cooling connection
  • Stainless steel expansion valve
  • CWR (Cold water recycling) hygrometry stabilisation
  • Operation and alarm indicators on the facade
  • Breaker
  • Built-in split electrical box
  • EC  adjustable speed ventilation
  • RSF wireless remote control
  • Display showing temperature and the system’s different functions
  • Nitrogen-pressurized on delivery
  • KCH built-in heating
  • KHGR% built-in humidifier
Vintage accessories
  • KPR Lift pump kit
  • BNS Low sound emission kit for condensation unit
  • KLPWSECU Secure Pressure Relief kit for humidifier

Condensation units

House, apartment, commercial premises, garage, ... A solution for each installation of wine cellar air conditioner.

Friax designs and produces its air conditioners in France in order to incorporate the best technologies. Specially developed for the wine cellar, control of regulation and sustainability are the central elements of our R&D.

To find out the size / power of appliance required for your cellar, go to the selection tool.

Air cooling units

GCH | Size 30 to 122

Units of size 30 to 122 are equipped with Condensation Unit GCH. Aesthetic, modern and practical groups, for an easy and discreet installation.

----

The GCH units consist of a frame in galvanized sheet metal and a bodywork coated with two-tone paint intended for outdoor installation.

The use of a micro-channel coil and an electronically commutated (EC) axial fan driven by the split regulation makes it possible to optimize the operation of the refrigeration system in summer and winter.

They are equipped with a tank, a liquid line with dehydrator and sight glass. Flare valves are provided for the refrigeration connection.

The safety of the group is ensured by high and low pressure cartridge pressure switches. The KPC condensation temperature control allows the correct operation of the refrigeration system in summer and winter.

The compressor receives a regulated RC crankcase heater to ensure its protection when the Friax split works in heating mode. The electrical connection is made on a waterproof electrical box. Condensing units are pre-charged with refrigerant.

Access to the electrical part is facilitated thanks to the gate located on the side of the device.
The hinged cover simplifies commissioning and maintenance operations.

The acoustic insulation of the group can be reinforced with a BNS kit.

GC | Size 170 to 230

climatiseur de cave à vin friax industrie groupe à air

Size 170 to 230 air-cooled splits are equipped with GC units. Powerful, durable and robust groups, for a reliable and maintainable installation.

----

GC units consist of a frame in galvanized sheet metal and a body coated with light gray EPOXY paint (RAL7035) intended for outdoor installation.

They are equipped with a tank, a liquid line with dehydrator and sight glass. Flare valves are provided for the refrigeration connection.

The safety of the group is ensured by high and low pressure cartridge pressure switches. A KPC condensation pressure control allows the correct operation of the refrigeration system in summer and winter.

The compressor receives an RC regulated crankcase heater to ensure its protection when the Friax split works in heating mode. The electrical connection is made on a waterproof electrical box. Condensing units are pre-charged with refrigerant.

GC units are supplied with anti-vibration mounts and a wall bracket.

The acoustic insulation of the group can be reinforced with a BNS kit.

Water cooling units

W | Size 30 to 230

climatiseur de cave à vin friax industrie groupe à eau

Size 30 to 230 water-cooled splits are fitted with W units.

----

The cased water condensing units of Friax cellar air conditioning splits are equipped with a galvanized sheet metal frame incorporating the Plug & Lock support as well as anti-vibration mounts. The bodywork is coated with a baked epoxy paint in light gray color (RAL7035).

The groups are equipped with a liquid line with dehydrator and sight glass. The safety of the group is ensured by high and low pressure switches with HBP cartridge. Condensing pressure regulation is provided by a VEP pressostatic water valve. It ensures the proper functioning of the refrigeration system in summer and winter.

The electrical connection is made on a waterproof electrical box.

Condensing units are pre-charged with refrigerant.

SPC…

30

48

Cooling capacity

W

780

1100

Heating capacity*

W

800

800

Electrical characteristics

SPC…

30

48

Voltage

50Hz

230 V/1+T

230 V/1+T

Electrical current requirement

A max

4.1

4.1

Condensation unit

SPC…

30

48

Air flow

m3/h

405

510

Sound pressure level 5 m away without BNS (noise reduction system)

db

40

44

Sound pressure level 5 m away with BNS db 37 41
Sound pressure level 5 m away W unit db 37 40
Gas connection suction (Flare) Φ

3/8′

3/8′

Gas connection liquid line (Flare) Φ 1/4′ 1/4′
Water connection on W Φ 2 x 1/2’M 2 x 1/2’M
Net weight

Kg

36

38

Body colour

RAL7035

RAL7035

Refrigerant

R134A

R134A

Evaporator SPC… 30 48
Ventilator Nb 1 1
Air flow m3/h 225 335
Gas connection suction (Flare) Φ 3/8′ 3/8′
Gas connection liquid line (Flare) Φ 1/4′ 1/4′
Net weight Kg 17 18
Body colour Black/Bronze Black/Bronze

* on Vintage system

 All the technical documentation is available in your Pro Access

CHOOSE FRIAX

We can recommend a stockist who can advise you on your specific requirements

You have Successfully Subscribed!